Skip to main content
OSHA recordkeeping calculators

TRIR and DART Rate Calculator

Enter the numbers from your OSHA 300 log and the hours your employees worked. You get your total recordable case rate (TRIR) and your DART rate, calculated with the formula in OSHA’s recordkeeping instructions.

TRIR
—
DART
—

How this works

Both rates use the formula in OSHA’s recordkeeping forms package: the number of cases, multiplied by 200,000, divided by the hours worked by all employees. The only difference is which cases are counted.

TRIR counts every recordable case — the number of line entries on the OSHA 300 log for the year. DART counts only the entries checked in column H (days away from work) plus those checked in column I (job transfer or restriction).

For example, a business with 3 recordable cases, 2 of them involving days away or restriction, and 100,000 hours worked has a TRIR of 3 × 200,000 ÷ 100,000 = 6.00 and a DART rate of 2 × 200,000 ÷ 100,000 = 4.00.

Sources

Industry lists are taken directly from 29 CFR Part 1904 as published on eCFR, text as of 2026-11-19. General guidance only, not legal advice. A written request from OSHA or the Bureau of Labor Statistics overrides any exemption shown here.

Questions about this calculator

Under 29 CFR 1904.7, a work-related injury or illness is recordable if it results in death, days away from work, restricted work or transfer to another job, medical treatment beyond first aid, or loss of consciousness — or if it is a significant injury or illness diagnosed by a physician or other licensed health care professional. Each recordable case is one line on the OSHA 300 log.

TRIR, the total recordable case rate, counts every recordable case. DART counts only the cases serious enough to involve days away from work (column H of the 300 log) or a job transfer or restriction (column I). DART is always equal to or lower than TRIR.

It is the number of hours 100 employees working 40 hours a week for 50 weeks would work in a year. Using it as the base turns a raw case count into a rate per 100 full-time workers, so businesses of different sizes can be compared.

It is the total hours actually worked by all employees during the year, which you also enter on the OSHA 300A summary. The forms package includes an optional worksheet for calculating it.

Keep the records the calculator assumes

The OSHA 300 Recordkeeping Pack in our checklist library walks through the 300 log, the 300A summary and the 301 incident report. WorkSafely SMB keeps all three for every site in one place.