Ladder Training Under 1926.1060: The Four Topics You Must Cover and the Three Moments You Must Retrain
OSHA 1926.1060 requires construction employers to train every ladder and stairway user. See the four required topics and the three retraining triggers.
A two-person remodeling crew brings a twenty-foot extension ladder to a job, and the owner hands it to a new hire with a casual "set it up against the fascia, and be careful." The new hire has used a stepladder at home and nothing taller. The owner is not careless; he has used extension ladders for twenty years and cannot remember anyone teaching him, so it does not occur to him that teaching is a step. This post answers one narrow question for contractors: what does OSHA's ladder and stairway training standard, 29 CFR 1926.1060, actually require, and when does the training you already gave stop counting?
It is a different question from the ones our neighboring posts answer. Portable Ladder Safety covers how ladders fail in use, and Temporary Stairways on Construction Sites covers the stairway rule. Here the subject is the training obligation itself.
Where 1926.1060 sits and who it reaches
Section 1926.1060, titled "Training requirements," is part of Subpart X, the construction standard for stairways and ladders. Because it is in Part 1926, it applies to construction work: new building, remodeling, roofing, repair, painting and similar activity. A shop that uses ladders to reach stock shelves is working under general industry rules instead, and those are a separate conversation. If your crew does both, the construction work is where 1926.1060 attaches.
The standard is short. Its first paragraph requires the employer to provide a training program for each employee who uses ladders and stairways, as necessary. The program has to enable each employee to recognize the hazards related to ladders and stairways and to train each employee in the procedures to follow to minimize those hazards. Notice what that sentence leaves out. It does not set a number of hours or name a certified course. It does not say a video is enough or that a video is not enough. It states a result, which is that the employee can recognize the hazard and knows the procedures. The employer owns the job of getting there.
Notice also who is covered: each employee who uses ladders and stairways. A site superintendent who climbs a ladder twice a day is covered. The seasonal laborer is covered. So is the apprentice who is mostly on the ground but occasionally carries materials up a stairway. The standard attaches to use, not to job title.
The four topics the training has to cover
The standard lists what the program must include. In plain terms there are four subjects.
The first is the nature of the fall hazards in the work area. This is the site-specific part. A ladder against a one-story wall over a flat slab is a different hazard from the same ladder over a sloped driveway, near an open stairwell, or beside an energized service drop. Training that talks only about ladders in general misses the part of the sentence that says "in the work area."
The second is the correct procedure for erecting, maintaining and disassembling the fall protection systems the employee will use. For most small contractors this item is about the system that goes with the ladder or stairway, such as stairway railings or a guard at an opening, rather than a full personal fall arrest rig. If your crew does not use such systems at a given job, the content for this item is thin at that job. If it does, workers need to know how the system goes up, how it is kept in working order and how it comes down, because the dismantling is often when people are hurt.
The third is the proper construction, use, placement and care in handling of all stairways and ladders. This is the item people picture when they think of ladder training. It includes choosing the right ladder for the task, setting up a portable ladder at the proper angle, making sure the top extends far enough past the landing when it is used for access, keeping the three points of contact when climbing, not carrying loads that interfere with a firm grip, and not standing on the top step of a stepladder. The related requirements for the ladders themselves sit in 1926.1053, titled "Ladders." Training should teach the worker what that standard assumes they know.
The fourth is the maximum intended load-carrying capacity of the ladders used. This is the item most often skipped. Every ladder has a duty rating, and the rating covers the worker, the tools and the materials together. A worker who weighs a lot carrying a box of tile up a ladder rated for less is overloading it whether or not the ladder visibly objects. The training needs to teach people to find the rating and add up what they are bringing.
Training and inspection are related, but they are not the same thing
Employers sometimes assume that having a competent person inspect ladders makes training unnecessary, or the reverse. Section 1926.1053 requires ladders to be inspected by a competent person for visible defects on a periodic basis and after any occurrence that could affect their safe use, and it requires a ladder with structural defects to be marked or tagged and withdrawn from service until repaired. That obligation is separate from 1926.1060.
The two do work together. The person who uses the ladder every day is the person most likely to notice a cracked rail, a bent rung or a missing foot. If that person has been taught what counts as a defect and what to do about it, which is to stop, tag it and tell somebody, the inspection program has many more eyes than its single competent person. If the worker has not been taught, a damaged ladder stays in the truck until the next scheduled look.
The three moments that require retraining
The second paragraph of 1926.1060 deals with retraining, and it is the part contractors forget. Where the employer has reason to believe that an employee who has already been trained does not have the understanding and skill the standard requires, the employer must retrain that employee. The standard gives three circumstances in which this applies.
The first is a change in the workplace that makes previous training obsolete. A crew that has spent months on single-story houses and moves to a three-story building with an open stairwell and a scaffold alongside has a different set of fall hazards. The ladder skills carry over, but the hazard recognition portion does not.
The second is a change in the types of ladders or stairways in use. A company that has always used wooden stepladders and switches to fiberglass extension ladders, or buys a platform ladder, has introduced equipment with different setup rules and different load ratings. Training on the old equipment does not obviously cover the new.
The third is evidence that the employee's knowledge or use is inadequate. Nobody has to wait for an injury. A foreman who sees a worker leaning out to the side of a ladder to reach farther, or standing on the top cap, or carrying a bucket up with one hand, has just obtained exactly that evidence. The standard treats this as a trigger to retrain, and an employer who saw the behavior and did nothing is in a poor position if an inspector later asks what the company did about it.
What to keep, and what the standard does not say
Unlike the fall protection training rule in 1926.503, which requires a written certification, the text of 1926.1060 as we read it does not call for a certificate. That should not be read as permission to keep nothing. Whether or not a form is required, the company's best evidence that it provided training is a simple record: the date, the employee, the topics covered, who delivered the training, and for retraining, the reason for it. Our post on fall protection training certification under 1926.503 shows the kind of record contractors already keep for the harder case, and the same habit works here.
A practical rhythm for a small crew has three parts. Cover the four topics when someone first joins, with the site-specific hazards added at the start of each new job. Write down the retraining triggers in your onboarding notes so that a new truck full of fiberglass ladders prompts a short refresher without anyone having to remember the rule. And treat what the foreman sees on the job as part of the program: a quiet correction on the spot, followed by a note in the record, is a retraining event with very little overhead.
What a good program does not promise
Following this post will not make a business compliant, and nothing here replaces reading the standard itself and the rules in your state. Some states run their own plans, and those can differ from the federal text. Whether a given training program is adequate is judged on what an inspector finds when they ask workers what they know, not on what the binder says. The most useful test is the simplest: pick a worker at random, ask them to show you where the load rating is on the ladder they are using, and ask what they would do if the ground were soft. If they can answer, the program is working. If they cannot, the training has not reached the person who needs it, and the fix is a conversation on the next job rather than a better binder.
Related reading: Portable Ladder Safety | Fall Protection Training Under 1926.503 | Temporary Stairways on Construction Sites
OSHA standards cited
- 29 CFR 1926.1060
Construction Industry Standards
- 29 CFR 1926.1053
Construction Industry Standards
- 29 CFR 1926.503
Construction Industry Standards
Always verify current OSHA standards at osha.gov. This article reflects standards in effect at the date of publication.
Not sure where you stand?
Take the 5-minute compliance assessment. Answer a few questions about your business and get a prioritized list of what OSHA expects, free.
Related Articles
Continue learning about OSHA compliance and workplace safety
Training
Fall Protection Training Under 1926.503: What the Written Certification Must Say and When It Goes Stale
OSHA 1926.503 requires fall protection training by a competent person plus a written certification. See what it must contain and when retraining applies.
Training
HazCom Training Under 1910.1200(h): What Must Be Covered, and the Two Moments It Has to Happen Again
OSHA 1910.1200(h) says what hazard communication training must cover and when. A plain-English guide for small shops, from first day to new-chemical retraining.
Training
Your Online Safety Training Probably Doesn't Satisfy OSHA — Here's What the Video Can't Do
Several OSHA standards require hands-on evaluation, not just a video. Here's which ones demand a demonstration, a fit test, or a competent person watching.