Red Cans and Yellow Stripes: What OSHA's Safety Color Code Actually Requires in a Small Shop
29 CFR 1910.144 sets red for flammable-liquid cans and danger signs and yellow for caution and physical hazards. Here is what it asks of a small shop.
A new hire walks into the back of your shop on a Monday morning and sees a row of red plastic and metal cans along the wall. Some have a yellow band, some have the contents lettered on the side, and one, which someone filled from a drum last month, has nothing on it at all. Which of those cans holds gasoline? Which holds mineral spirits? Which holds water for the pressure washer?
That small problem is what the federal safety color code exists to solve. It lives in 29 CFR 1910.144, "Safety color code for marking physical hazards," and it is one of the shortest standards in the general industry rules. It is short enough that many owners have never read it, and so they either ignore it entirely or assume it demands an elaborate floor-marking system. It does neither. This post walks through what the text actually says, what it leaves to other standards, and how a small shop can follow the parts that apply to it without spending a weekend with a paint roller.
What the standard says about red
The red provisions are the part most small businesses touch every week. Under 1910.144, safety cans and other portable containers of flammable liquids that have a flash point at or below 80 degrees Fahrenheit must be painted red. The standard excludes shipping containers from that requirement, which means the drum your supplier delivers is not what the rule is aimed at. The rule is aimed at the can you carry across the shop and pour from.
Red alone is not enough. The standard asks for some additional, clearly visible identification, and it gives two ways to supply it: a yellow band around the can, or the name of the contents conspicuously stenciled or painted on the can in yellow. The logic is easy to follow. Red tells a person at a glance that the container holds something that can ignite at ordinary temperatures. The yellow band or the lettered name tells them which flammable liquid it is, so that the can of fuel is not mistaken for the can of solvent or the can of something that should never be poured into a particular tank.
Two other red requirements are easy to overlook. The standard says red lights are to be provided at barricades and at temporary obstructions, and it says danger signs are to be painted red. The first matters any time you block off a trench, a hole in the floor, a section of dock, or a temporary obstruction in a driveway or yard at night. The second ties directly to how you buy signs, which we return to below.
It helps to be clear about what "flash point" means here, because the standard turns on it. The flash point is the lowest temperature at which a liquid gives off enough vapor to ignite near its surface. A liquid with a low flash point does not need to be warm to burn. That is why the threshold in the color code sits at 80 degrees: many common shop liquids, including gasoline and several solvents, can give off ignitable vapor at temperatures well inside the range of a normal workday. Your safety data sheet for each product lists its flash point, and checking those sheets is the reliable way to decide whether a given can falls under the red requirement. Do not guess from the smell or the label's marketing language.
What the standard says about yellow
The yellow provision is broader and, for most shops, more useful. Yellow is the basic color for designating caution and for marking physical hazards. The standard names the kinds of hazards it has in mind: striking against, stumbling, falling, tripping, and being "caught in between."
Read that list slowly, because it describes most of what hurts people in a small facility. Striking against covers low beams, protruding equipment, and the corner of a rack at head height. Stumbling and tripping cover changes in floor level, a step down from a loading area, a floor drain cover that sits proud of the slab, a cable run across a walkway. Falling covers the edges of platforms and openings. Caught in between covers the gap where a moving gate meets a post, the space between a pallet rack and a column, or the pinch point between a swinging door and a wall.
Notice what this does and does not require. The standard says yellow is the basic color for marking these hazards. It does not hand you a floor plan, a stripe pattern, or a list of locations that must be painted. The obligation to mark a hazard comes from your own walk-through. If you find a spot where a person could plausibly trip, strike their head, or get pinched, the color code tells you what color to use when you decide to mark it. It is guidance on the how, not an inventory of the where.
That is also why two shops can look very different and both be reasonable. A small machine shop with a low pipe run over a walkway might wrap that pipe in yellow and call it done. A food distributor might mark a dock-plate edge. A woodworking shop might mark the swing area of a door that opens into a work aisle. None of them needs a hundred feet of striping.
Where the color code stops and other standards begin
An honest reading of 1910.144 also means knowing its edges. The color code is about the color of physical-hazard markings. It does not tell you how wide a stripe should be, how tall letters on a sign must be, or what words a particular sign should carry. Those details sit with a different standard, 1910.145, the one governing accident prevention signs and tags, and we cover it in our post on safety signs and tags. If you are buying signs, read the two together: 1910.144 tells you red means danger, and 1910.145 tells you how a danger sign is to be designed.
Nor does the color code decide how to store a flammable liquid. The color of the can is a labeling aid. Where the can may be kept, how much you may hold outside an approved cabinet, and how to dispense from it belong to the flammable liquids rules, and we walk through those in our post on flammable and combustible liquids storage. A perfectly red can with a yellow band left open next to a heater is still a problem, and no paint choice fixes it.
Finally, color is not a substitute for chemical labeling. The hazard communication standard governs the labels on the containers you receive and the secondary containers you fill yourself. A red safety can marked with the name of its contents helps with identification; it does not on its own satisfy the labeling duties that apply to a workplace container of a hazardous chemical. If you decant a solvent into a can, the hazard communication rules are the place to check what that can needs, in addition to the color.
A practical walk-through for a small shop
You do not need a consultant for this. Take an hour with a clipboard and do four things in order.
First, collect every portable container of flammable liquid in the building. Check the safety data sheet for each product and note the flash point. Anything at or below 80 degrees Fahrenheit that you pour from by hand should be in a red can with either a yellow band or its contents named in yellow. Replace unmarked cans, or repaint and letter them, and make a habit of refusing to put a flammable liquid into any container that is not marked. The most common failure is not the missing paint at purchase; it is the second can, the one someone grabbed because the first was empty.
Second, walk your main aisles and work areas at the same speed an employee would walk them, then again slowly with your head up. Look for the things on the yellow list: places people could strike their head or shoulder, trip, stumble, fall, or get caught between objects. Mark the ones you find in yellow and write down any you decide not to mark and why. A note that says "pipe at 6 feet, aisle is closed to foot traffic" is a reasonable record. A blank space is not.
Third, check your signs. Any sign that warns of danger should be red as the standard describes, and it should follow the design rules in the signs standard. Remove generic stickers that were bought for appearance rather than function and replace them with signs that mean what they say.
Fourth, put a barricade routine in writing. Decide who sets out a barricade and red light when a temporary obstruction goes in, who checks it, and who takes it down. It can be two sentences on a single page. The standard asks for red lights at barricades and temporary obstructions, and the most common reason they are missing is that nobody was ever assigned to do it.
What an inspector is likely to look at
Color code issues rarely stand alone in an inspection. They tend to come up while an inspector is already looking at something else: a fire in the flammable storage area, a trip hazard near an exit, a hazard communication walk-around. A red can with no identification beside a cabinet full of unlabeled bottles tells an inspector something about how the whole shop runs. The reverse is also true. A shop where every can is marked, every aisle hazard is yellow, and every danger sign is red tends to read as a shop where someone is paying attention.
None of this makes the color code a cure-all, and following it does not make a workplace compliant on its own. It is one small, inexpensive piece of a larger set of duties. But it is also one of the few OSHA requirements that can be satisfied with a can of paint and an afternoon, and it gives a new hire a simple rule they can carry in their head: red means danger and flammable liquid, yellow means watch where you put your feet and your head.
Related reading: Safety Signs and Tags | Flammable and Combustible Liquids Storage | Written Hazard Communication Program
OSHA standards cited
- 29 CFR 1910.144
General Industry Standards
- 29 CFR 1910.145
General Industry Standards
Always verify current OSHA standards at osha.gov. This article reflects standards in effect at the date of publication.
Not sure where you stand?
Take the 5-minute compliance assessment. Answer a few questions about your business and get a prioritized list of what OSHA expects, free.
Related Articles
Continue learning about OSHA compliance and workplace safety
Hazard Control
Snow and Ice Are Written Into the Rule: What OSHA 1910.22(a)(3) Asks of Your Dock, Doorways and Walkways on a Frozen Morning
OSHA 1910.22(a)(3) names snow and ice as hazards walking-working surfaces must be kept free of. What that means for small shops on the first frozen morning.
Hazard Control
Stairs in Your Shop or Warehouse: What OSHA 1910.25 Asks You to Measure
OSHA 1910.25 covers general industry stairs: riser and tread uniformity, headroom, handrails and stair rails. A walk-through for small shop owners.
Hazard Control
Mezzanine Guardrails and Toeboards: What OSHA 1910.29 Actually Measures
OSHA 1910.29 sets the height, strength and gap rules for guardrails and toeboards. What a small warehouse or shop owner needs to check on a mezzanine edge.