Skip to main content
Construction SafetyReviewed against current OSHA standards

The Tenant Is Still Working Upstairs: What OSHA 1926.34 Requires of Your Crew's Exits

OSHA 1926.34 requires free, unobstructed, marked exits in any occupied building. See what that means when your crew works inside a space people still use.

Updated November 10, 2026
6 min read
By the WorkSafely safety team

Your crew is renovating the second floor of an office building. The first floor is still open, a dentist's practice shares the stairwell, and your drywall delivery just landed in the corridor outside the one door that leads to the back stairs. The stack is neat, it is only there until lunch, and nobody on your crew will be anywhere near it in a fire. The delivery driver is gone and you have a schedule to keep. Is that a problem?

Under 29 CFR 1926.34, titled Means of Egress, it can be. This post answers a narrow question: what does the construction standard require of exits in a building or structure that people occupy while you work on it? It is a different question from the general industry exit route rules in Subpart E, which we cover in our emergency lighting and exit routes post. Here we are looking at the short, blunt construction rule that applies to the jobsite and the building around it.

What 1926.34 says, in three parts

The standard is brief. Paragraph (a) is the general requirement: in every building or structure, exits must be arranged and maintained so that egress is free and unobstructed from all parts of the building at all times when it is occupied. The words that matter are "at all times when it is occupied." There is no carve-out for a quiet afternoon or a temporary stack of materials. If people are in the building, the exits have to work.

Paragraph (a) also addresses fastenings. A lock or fastening that prevents free escape from the inside of a building is not allowed, with a narrow exception for institutions such as mental, penal or corrections facilities where supervised personnel are always on duty. A small contractor will almost never be in that situation. For everyone else the practical meaning is simple: an exit door that cannot be opened from the inside without a key is a problem, and the standard does not care that you installed the lock for security.

Paragraph (b) is about marking. Exits must be marked by a readily visible sign, and access to an exit must also be marked where the exit or the way to reach it is not immediately visible to the occupants. Paragraph (c) covers maintenance: the means of egress must be continually maintained free of obstructions or impediments to full instant use in case of fire or other emergency.

Read together, the three paragraphs describe a route a person can find, reach and use without thinking, and a route that stays that way for as long as the building is occupied.

Why construction work threatens exits more than finished buildings do

A finished building usually has its exits where the architect put them. A building under construction or renovation changes every week. Walls come down, temporary partitions go up, door hardware is removed for painting, and the stairwell becomes the staging area for everything that will not fit in the elevator. None of this is malicious. It is the ordinary logistics of getting work done, which is exactly why exits get blocked.

Several situations come up on small jobs again and again. Materials delivered to a corridor and left there. A temporary partition built to contain dust that happens to cut off a tenant's path to the stairs. A door removed so a floor can be refinished, then replaced with a sheet of plywood. Exit signs removed along with ceiling tiles and never put back. A chain or padlock added to a rear door to stop theft after hours, still on when the first tenant arrives in the morning. Each one is a small convenience to the crew, and each one changes the building from one a person can leave in a hurry into one they cannot.

The standard does not distinguish between a permanent obstruction and a temporary one. A pallet is an impediment to "full instant use" whether it will be there for ten minutes or ten days. When you plan the day, the question is not whether the blockage is short but whether anyone could need that exit while it is blocked.

Who is responsible when the building is not yours

Small contractors often assume that exits belong to the building owner. The owner has obligations too, but 1926.34 covers the building during your work, and what your crew does to the exits is in your hands. If your materials, your partition or your padlock caused the problem, you are the one who created the hazard. On a multi-employer site, OSHA can look at more than one employer, which makes it worth settling in writing who checks what.

The practical answer is to treat egress as part of the pre-job conversation rather than an afterthought. Before you start, walk the building with whoever manages it and identify the exits that serve the area you are working in and the areas people will still use. Ask which exits must stay available and which can be closed, and whether closing any of them changes what the remaining ones need to carry. If the answer is that an exit must be closed, that is a conversation to have with the owner, and with the local fire authority where the work touches life-safety systems, before the closure rather than after it.

Habits that keep exits usable

The rule does not call for paperwork, which is good news for a crew without a safety department. It calls for habits.

Start with a delivery rule. Materials go to a designated staging spot that is never in a corridor, stairwell or the approach to an exit. Tell suppliers where to leave things, and tell your own crew that the corridor is not storage. When something lands in the wrong place, it gets moved when it arrives, not at lunch.

Then add an end-of-shift walk. Whoever closes out the day follows each exit route from the work area to the outside and asks three questions. Is the path clear? Is the door able to open from the inside, with nothing chained, blocked or screwed shut? Can a person who does not know the building see the sign? This takes minutes and it is the single check that catches what a busy day creates. If your jobsite inspections are already assigned to a competent person, as we discuss in our post on frequent and regular jobsite inspections, the egress walk fits naturally into that round.

Finally, treat changes as triggers. When a partition goes up, a door comes off or a ceiling opens, re-check the path and the signs in that area the same day. Exit signs are easy to lose during demolition and ceiling work, and the standard's marking requirement does not pause because the sign was in your way.

Where this stops

1926.34 is a floor, not a full fire-safety program. Whether you need an emergency action plan, how many exits a given building must have, and what alarm or detection systems must work during your job are separate questions governed by other standards and by local fire codes. Following the practices above does not make a job compliant on its own, and a job can be cited for things this post does not cover. What the standard does give you is a clear test you can apply every day: if someone were in this building right now and needed to leave, could they find the way out and use it?

For a crew working in an occupied building, that is a reasonable question to ask at the start of each shift, and again before you go home.

Related reading: Emergency Lighting and Exit Routes | Who Walks the Job Site?

OSHA standards cited

Always verify current OSHA standards at osha.gov. This article reflects standards in effect at the date of publication.

Not sure where you stand?

Take the 5-minute compliance assessment. Answer a few questions about your business and get a prioritized list of what OSHA expects, free.

Start free assessment